WAVE 3D CUBE ACOUSTIC PANEL
3D Wave Cubic Acoustic Panels are pre-finished acoustic wall tile designed to create a contemporary interior and open the realms of design flexibility in any interior environment. It is a lightweight semi-ridged the product that will create a contemporary and decorative interior whilst helping to reduce reverberation sound and assist in controlling back ground noise.Material | 100% polyester fibre without chemical binders or retardants. |
General use | Interior decoration, Sound-absorbing |
Features | Light weight, Easy installation, Non- toxic, non -allergenic and non-irritant, Tightness and dimensional stability |
NRC | 0.85 |
Size | 600*600*74mm |
Weight | 0.5kg |
Installation | 1. Pasting directly with spray, hot melt adhesive, glass glue, etc( according to different wall surface) 2. Use dedicated clips |
Application | Meeting hall, theater, music hall, gym, manufacturing shop, office, pub, hotel, Library, reading room ,classroom, kindergarten, piano room etc. |
Environmental
Kingkus is committed to best practice through our ISO 9001 and ISO 14001 accredited Quality and Environmental Management Systems.
Kingkus products contains a minimum of 75% previously recycled polyester fiber (from PET bottleflake)
ensuring comparatively low embodied energy.
Off-cuts and manufacturing waste is re-used or
recycled wherever possible.
Uncontaminated kingkus polyester fiber panel can be recycled.
Kingkus polyester fiber acoustic panel is manufactured from 100% polyester fibers and does not contain chemical binders including
formaldehyde. Kingkus polyester fibers support safer
indoor air quality and will not become a potential
airborne pollutant.
Suitable applications
Tackboard, hook-and-loop receptive surface, acoustic wallcovering. Accepts tacks and staples
Toxicity
Polyester is classed as no more toxic than wood under the state of New York Article 15 part 1120. Polyester is pH7.8 (where pH7.0 is neutral),resistant to biological, bacterial or vermin attack.
Impact Resistance
Not adversely affected at impact velocities over 52.5ft/s
Finish
Polyester fiber Non-woven. No pattern repeat but Panel has a directional grain. Product may vary from samples and batch to batch due to fiber blending and lay-up which is an inherent feature of this product.
Physical description / properties
Boiling Point: N/A
Melting Point: 428ºF
Vapour Pressure: N/A
Specific Gravity: Polyester 1.38
Flash point: N/A
Explosive limits: N/A
Solubility in water: Not soluble
Alkalinity: pH 7.8
Relative Vapour Density: N/A
Cleaning And Care:
Remove dust and dirt by dusting, vacuuming, or with a soft cloth or sponge and a solution of carpet
or upholstery shampoo. Always use a soft, damp cloth and blot dry. Spot cleaner
Commercial Instant Spot Remover has been used with success for light soil. No guarantee is given for cleaning results with this product.
Service
For further information about our panel or any other
Kingkus product, please contact your installation
professional
More Application
Key words:
acoustic panel acoustic board acoustic wall panel acoustic ceiling panel soundproof panel soundproof acoustic panel acoustical panel Acoustical Wall Solution sound proof panel acoustic ceiling baffles acoustic panels soundproofing acoustic sound panels acoustic material sound absorption panels Customed acoustic panel Polyester fiber acoustic panel Polyester acoustic panel Non-Woven panel Polyester acoustic felt PET acoustic panel carved acoustic panel 3D PET panel 3D cube panel Printing polyester panel 3D polyester panel embossed polyester panel wooden panel wooden acoustic panel wood board Grooved acoustic panel Perforated acoustic panel Micro wooden panel acoustic wood panel MDF acoustic panel wood wool acoustic panel wood wool cement board wood fiber panel shaped wood panel Fabric acoustic panel Wrapped acoustic panel acoustic diffusor diffusor panel acoustic PET screen acoustic furniture Acosutic screen acoustic panel shanghai acoustic panel suzhou acoustic panel changshu acoustic panel in Chi