Hybrid polyol Sdb10f-2 rigid PU foam for pipe insulation

BLEND POLYOL SDB10FRIGID PU FOAM FOR PIPE INSULATIONDESCRIPTIONSDB10F is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SDB10F use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every

Featured Products

BLEND POLYOL SDB10F
RIGID PU FOAM FOR PIPE INSULATION
DESCRIPTION
SDB10F is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SDB10F use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every performance of SDB10F finished foam products can meet the requirements of GB/T29047 standard.
The foam produced has the characteristics as following:
 
  1. Water blowing agent, environmental protection, zero ozone depleting blowing agent(0 ODP).
  2. Every performance of the foam product meets the requirements of GB/T29047 standard.
  3. Every performance of the foam product is very stable.
TYPICAL PHYSICAL PROPERTIES
 
Physical Properities Test MethodMetricValue
Core DensityGB/T 6343-2009kg/m360 up
Radial Compressive StrengthGB/T 8813-2008MPa0.3 up
Initial Thermal Conductivity(50°C)GB/T 10294-2008W/(m·K)0.033
Close Cell ContentGB/T 10799-2008%88
Water AbsorptionGB/T 8810-2005%10
Air bubblesGB/T 29047mm1/3Insulation Thickness.
Average cell size.GB/T 29047mm0.5
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours