Mass flow meter is a device that measures the mass of fluid traveling through a tube, in accordance with Coriolis Principle. Coriolis Mass flow meter can directly measure the fluid mass flow, and has great influence on the processing and measuring methods in the energy and chemical industries.Compared with the traditional volumetric flow measurement,it has the following advantages:
1. Measurement accuracy is higher than 0.2%
2. Wide application:Besides the common fluid,Mass flow meter can measure fluids such as non-Newtonian fluid,all kinds of slurry,suspensions,etc.
3. Convenient installation:No specific requirement of choosing upstream or downstream pipe.
4. High reliability
Features
Requires low maintenance,because of no movable parts.
Shows many parameter simultaneously,such as mass flow,temperature,density,etc.
Not affected by the fluid,saving the design&installation cost.
One pulser can be used for various fluids.
| el no. | HYCG06 | HYCG10 | HYCG15 | HYCG20 | HYCG25 | HYCG32 | HYCG50 | HYCG80 | HYCG100 | |||
| Mass accuracy grade | 0.2 0.3 0.5 choose | 0.2 0.3 0.5 choose | 0.2 0.3 0.5 choose | 0.2 0.3 0.5 choose | 0.2 0.3 0.5choose | 0.2 0.3 0.5choose | ||||||
| Max.flow rate | 1200kg/h | 1800kg/h | 3000kg/h | 4200kg/h | 12000kg/h | 15000kg/h | 60000kg/h | 180000kg/h | 240000kg/h | |||
| Temp.accuracy | ±1ºC | ±1ºC | ±1ºC | ±1ºC | ±1ºC | ±1ºC | ||||||
| Repeatability | ±0.05% | ±0.05% | ±0.05% | ±0.05% | ±0.05% | ±0.05% | ||||||
| MWP | 4MPa | 25MPa | 4MPa | 4MPa | 4MPa | 4MPa | ||||||
| Nominal diameter | 6mm | 10mm | 15mm | 20mm | 25mm | 32mm | 50mm | 80mm | 100mm | |||
| End connection | Flange,[customizable] | M32×1.5Nut[customized] | Flange,[customizable] | flange,[customizable] | flange,[customizable] | flange,[customizable] | ||||||
| Fluid temperature | -200~200ºC | -200~200ºC | -200~200ºC | -200~200ºC | -200~200ºC | -200~200ºC | ||||||
| Wetted parts | Stainless steel 316L | Stainless steel 316L | Stainless steel 316L | Stainless steel 316L | Stainless steel 316L | Stainless steel 316L | ||||||
| RH | ≤95%,non condensed | ≤95%,non condensed | ≤95%,non condensed | ≤95%,non condensed | ≤95%,non condensed | ≤95%,non condensed | ||||||
| Loss of pressure | ≤0.2MPa | ≤0.2MPa | ≤0.2MPa | ≤0.2MPa | ≤0.2MPa | ≤0.2MPa | ||||||
| Ex-mark | Ex[ib]llBT1~T6 Gb/Ex[ib]llCT1~T6 Gb | Ex[ib]llBT1~T6 Gb/Ex[ib]llCT1~T6 Gb | Ex[ib]llBT1~T6 Gb/Ex[ib]llCT1~T6 Gb | Ex[ib]llBT1~T6 Gb/Ex[ib]llCT1~T6 Gb | Ex[ib]llBT1~T6 Gb/Ex[ib]llCT1~T6 Gb | Ex[ib]llBT1~T6 Gb/Ex[ib]llCT1~T6 Gb | ||||||
| Atmospheric pressure | 86~106KPa | 86~106KPa | 86~106KPa | 86~106KPa | 86~106KPa | 86~106KPa | ||||||
| Operating voltage | AC85~265V,DC24V | AC85~265V,DC24V | AC85~265V,DC24V | AC85~265V,DC24V | AC85~265V,DC24V | AC85~265V,DC24V | ||||||
| Output signal | RS485;Modbus RTU; 0~10KHz | RS485;Modbus RTU; 0~10KHz | RS485;Modbus RTU; 0~10KHz | RS485;Modbus RTU; 0~10KHz | RS485;Modbus RTU; 0~10KHz | RS485;Modbus RTU; 0~10KHz | ||||||